An oil derrick is a drilling rig designed for use in oil and natural gas production. The basic version has an upright stationary section which is potentially capable of supporting hundreds of tons of weight, combined with a movable boom which is used to raise and lower equipment. Derricks of various designs have been in use for centuries to extract valuable resources from under the Earth, and continue to be widely used today.
HOUSE RULES FOR G40:
Oil Refineries can be built in any of the below Territories that have been controlled for at least one round. Only one Refinery per territory. This unit increases the IPC value of the territory by 1. The effects would be immediate, as the unit would be placed before the collect IPCs phase of the game.
Territories enriched with Oil:
-All Dutch Islands
-Columbia, Venezuela, Bolivia
-Central US
-Scotland
-Western Canada, Alaska
-Alexandria, Cairo, Tobruk, Trans-Jordon
-Union of South Africa
-Romania
-Iraq
-Persia
-Caucasus, Ukraine
-West India, Burma
Cost: 3IPC
Movement: NA
Can be bombed and removed from play
All 3D Units are printed in White Strong & Flexible Material. Depending on the shape of your model and orientation, you might see print lines, or “stepping” phenomena on your model, which is a natural artifact of 3D printing using the SLS process. SLS printing works by printing layer by layer, and while our layers are around 0.12mm thin, there is a "step" between each layer, much like a staircase.
Territories enriched with Oil:
-All Dutch Islands
-Columbia, Venezuela, Bolivia
-Central US
-Scotland
-Western Canada, Alaska
-Alexandria, Cairo, Tobruk, Trans-Jordon
-Union of South Africa
-Romania
-Iraq
-Persia
-Caucasus, Ukraine
-West India, Burma
Cost: 3IPC
Movement: NA
Can be bombed and removed from play
All 3D Units are printed in White Strong & Flexible Material. Depending on the shape of your model and orientation, you might see print lines, or “stepping” phenomena on your model, which is a natural artifact of 3D printing using the SLS process. SLS printing works by printing layer by layer, and while our layers are around 0.12mm thin, there is a "step" between each layer, much like a staircase.
Will be printed in Gray ready to custom paint.
CM: 1.1 x 1.1 x 2.81
An oil derrick is a drilling rig designed for use in oil and natural gas production. The basic version has an upright stationary section which is potentially capable of supporting hundreds of tons of weight, combined with a movable boom which is used to raise and lower equipment. Derricks of various designs have been in use for centuries to extract valuable resources from under the Earth, and continue to be widely used today.
HOUSE RULES FOR G40:
Oil Refineries can be built in any of the below Territories that have been controlled for at least one round. Only one Refinery per territory. This unit increases the IPC value of the territory by 1. The effects would be immediate, as the unit would be placed before the collect IPCs phase of the game.
Territories enriched with Oil:
-All Dutch Islands
-Columbia, Venezuela, Bolivia
-Central US
-Scotland
-Western Canada, Alaska
-Alexandria, Cairo, Tobruk, Trans-Jordon
-Union of South Africa
-Romania
-Iraq
-Persia
-Caucasus, Ukraine
-West India, Burma
Cost: 3IPC
Movement: NA
Can be bombed and removed from play
All 3D Units are printed in White Strong & Flexible Material. Depending on the shape of your model and orientation, you might see print lines, or “stepping” phenomena on your model, which is a natural artifact of 3D printing using the SLS process. SLS printing works by printing layer by layer, and while our layers are around 0.12mm thin, there is a "step" between each layer, much like a staircase.
Territories enriched with Oil:
-All Dutch Islands
-Columbia, Venezuela, Bolivia
-Central US
-Scotland
-Western Canada, Alaska
-Alexandria, Cairo, Tobruk, Trans-Jordon
-Union of South Africa
-Romania
-Iraq
-Persia
-Caucasus, Ukraine
-West India, Burma
Cost: 3IPC
Movement: NA
Can be bombed and removed from play
All 3D Units are printed in White Strong & Flexible Material. Depending on the shape of your model and orientation, you might see print lines, or “stepping” phenomena on your model, which is a natural artifact of 3D printing using the SLS process. SLS printing works by printing layer by layer, and while our layers are around 0.12mm thin, there is a "step" between each layer, much like a staircase.
Will be printed in Gray ready to custom paint.
CM: 1.1 x 1.1 x 2.81